Fluke 1AC-A1-II VoltAlert AC Non-Contact Voltage Detector

The features for the Fluke 1AC-A1-II AC Voltage Detector include:

Voltbeat technology and continuous self-test - so you always know it is working Upon detection, tip glows and beeper sounds CAT IV 1000 V for added protection Expanded range: 90 V to 1000 V AC or 200 V to 1000 V AC depending on model 20 V to 90 V AC control circuit model also available

Operating principle: Senses the steady state electrostatic field produced by ac voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage. Voltage sensing ranges: Nominally, 90 V AC to 1000 V AC or 200 V AC to 1000 V AC depending on model, 45 Hz to 405 Hz; also a 20 V to 90 V control circuit model Detector tip style: Blade or round, depending on model Light source: One high intensity red LED Agency Approvals: c CSA us, CE, C-Tick Safety Rating: 1000 V, CAT IV IP Rating: IP 40 Operating Temperature: -10 °C to 50 °C Operating humidity ranges: 0 % to 95 % (0 °C to 30 °C), 0 % to 75 % (30 °C to 40 °C), 0 % to 45 % (40 °C to 55 °C) Operating Altitude: 3000 meters Batteries: 2 AAA alkaline batteries included